MAX 1

DESCRIPTION

This new loudspeaker model from Unison Research model is designed to be matched, in particular, to the Unison Research valve amplifiers. For this purpose both the sensitivity ando the impedance were optimized. The Unison Research Max It is a two-way floorstanding reflex-loaded system, with substantial internal volume despite a compact footprint. The two reflex ducts fire forward, making it easier to place the diffusers in the room. This speaker can also be used as front channel in home theater systems; with two pairs of diffusers (front and rear) you get an high-impact home theater presentation that does not require a center channel or sub-woofer.

The result is a definitive loudspeaker with full extension of the low frequencies, a speaker that is capable of reproducing high sound levels while being relatively easy to blend into the listening environment. You’ll experience a clear and defined midrange and natural, extended high frequencies as well.

TECHNICAL SPECS

System: Floor standing - front firing Reflex

Loudspeakers: 1 woofer 12"

1 copression driver with titanium diaphragm 1"

Number of way: 2 way

Frequency Responce: 30-20000 Hz

Cross-over:Woofer: Low Pass 12 dB

Tweeter: hogh pass 12 dB

Crossover Frequency: 2000 Hz

Power: 500 watt RMS

Amplifier: from 10 a 200 Watt RMS or more without clipping

Sensibility: 94 dB/2.83Vrms/1 meter

Nominal Impedence: 8 ohm

Room positioning: Close reflex ducts for near-wall positioning

Dimension: 95h x 35w x 45d cm

Weigth: 37 Kg