MAX 2

DESCRIPTION

This new Unison Research model is designed to be matched, in particular, to the Unison Research valve amplifiers. For this purpose not only the sensitivity but also the impedance were optimized. The MAX_2 is a two-way floor standing, reflex loaded system, of important size however compact. The reflex ducts is front firing to make easier to place the diffusers in the room. This speaker can also be used as front channel in home theater systems. With two pairs of diffuser (front and rear) you get an high- impact home theater system that does not require a center channel or sub-woofer.

This is undoubtedly a definitive loudspeaker with: full extension of the low frequency, capable of reproducing high sound level, not too difficult to fit into the environment, with a clear and defined midrange and high quality in high frequency reproduction.

TECHNICAL SPECS

System: Floor standing - front firing Reflex

Loudspeakers: 1 x 15” woofer

1 x 1.4 “ compression driver with titanium diaphragm

Numbers of ways: 2 way

Frequency Response: 30-20000 Hz

Cross-over: Woofer low-pass 12 dB

Tweeter high- pass 6 dB

Crossover Frequency: 800 Hz

Power: 500 watt RMS

Amplifier: from 10 to 200 Watt RMS or more – without clipping

Sensibility: 96 dB @2.83Vrms/1 meter

Nominal impedance: 8 ohm ( 7.4 ohm min )

Size: 101h x 43,5w x 54d cm

Weight: 60 Kg each