• พิมพ์

รายละเอียด

หมวด: Products

ฮิต: 286

C O U R B E T   S E R I E S

Courbet n°8 • Courbet n°7 • Courbet n°5 • Courbet n°4 • Courbet n°3

With more than 30 years of experience in speaker manufacturing, DAVIS Acoustics has once again created a custom transducer to match the unusual volume of the cabinet. Located midway between a speaker “bookshelf” and a “floor standing” of traditional size, the Courbet N ° 4 is equipped with a speaker bass / midrange capable of real prowess. The voice coil has been elongated (to maintain a constant energy, even during strong deflection), the bullet replaced by an inert dust cap (to ventilate the core of the driver and thus cool it) … in the end, we gets an ultra-ventilated speaker, able to go down to the bass, while significantly reducing its distortion. Once again, Kevlar was chosen for its ideal mass / stiffness ratio.

The tweeter of the range (TW28LD) perfectly accompanies this new speaker. Created with the same goal of transparency and precision, it is powered by a very small cable in pure copper sheathed in PTFE Teflon.

The crossover  is, as on the entire range, mounted “in the air” (handcrafted without any printed circuit). The contact is thus direct between each element of the crossover. Its components have been chosen to avoid any loss of dynamics and thus retain all the qualities of these speakers.

Specifications

Bass reflex : circular port
Nominal power : 90 W
Max Power : 130W
Number of way : 2
Number of drivers: 2
Sensitivity : 90 dB
Frequency response (+/- 3 dB) : 51 -25000 Hz
Tweeter : 28mm soft dome
Midrange / Woofer : Kevlar 13 cm/5 inch
Woofer : -
Dimensions (cm) : 82.5 (h) x 16 (l) x 22 (depth)
Weight (kg) : 12
Impedance : 4…8 ohms
Frequency cut off: 4000Hz